PENERAPAN FACE SAND PADA PASIR CETAK UNTUK MENGURANGI REJECT PRODUK DI PT. MITRA KARYA UTAMA

Authors

  • Lutiyatmi Lutiyatmi Politeknik Manufaktur Ceper, Indonesia
  • Tri Daryanto Politeknik Manufaktur Ceper, Indonesia
  • Hamid Abdillah Universitas Sultan Ageng Tirtayasa, Indonesia https://orcid.org/0000-0001-5257-6667

DOI:

https://doi.org/10.31316/jbm.v3i1.1251

Keywords:

Facesand, Greensand, Rejeck, Silinder Linier

Abstract

PT. Mitra Karya Utama (MKU) adalah salah satu industri pengecoran logam di Ceper yang menggunakan pasir cetak greensand sebagai bahan cetakan utama dalam pembuatan produk utamanya yaitu Silinder Linier. Produk ini dipesan oleh konsumen secara terus menerus (kontinyu) dan berkelanjutan. Kendala yang dihadapi, dalam proses produksi silinder linier ini mengalami kendala yang mempengaruhi hasil produk silinder linier. Cacat produk tersebut mengakibatkan kurang baik dan kurang berkwalitasnya produk tersebut dan mengakibatkan kerugian. Tujuan dari program ini adalah untuk mengatasi masalah produksi dan meningkatkan mutu produk. Program dilaksanakan dengan melakukan aplikasi penggunaan face sand pada cetakan produk. Penggunaan facesand dilakukan dengan membina operator industri mitra. Hasil yang diperolah adalah penerapan facesand pada cetakan mampu meningkatkan kuantitas produksi dan menurunkan rejek produk menjadi 10%.

Author Biographies

Lutiyatmi Lutiyatmi, Politeknik Manufaktur Ceper

Assistant Professor, jurusan Teknik Pengecoran Logam

Tri Daryanto, Politeknik Manufaktur Ceper

Assistant Professor, Jurusan Manajemen Industri

Hamid Abdillah, Universitas Sultan Ageng Tirtayasa

Assistant Professor, jurusan pendidikan vokasional teknik mesin

References

Abdillah, H., Munadi, M., & Supriyadi, N. W. (2020). Comparison Of 3d Printer and Wood Casting Pattern. Jurnal Elektro Dan Mesin Terapan, 6(2).

Abdillah, H., & Ulikaryani, U. (2020). Hybrid Manufacturing and Rapid Prototyping in Metal Casting Industry: A Review. Proceedings of the 2nd International Conference of Science and Technology for the Internet of Things, ICSTI 2019,. https://doi.org/10.4108/eai.20-9-2019.2290957

Atina, V. Z., Mahmudi, A. Y., & Abdillah, H. (2020). Ceper Foundry Industries, Technology Management Readiness for Industrial Revolution 4.0. Brawijaya International Conference on Multidisciplinary Sciences and Technology, 1(2020), 14–17.

Dalquist, S., & Gutowski, T. (2004). Life cycle analysis of conventional manufacturing techniques: sand casting. ASME International Mechanical Engineering Congress and Exposition, 47136, 631–641.

Khasanah, S. I., Sesunan, N. R., & Abdillah, H. (2020). Study of the reclamation of waste co2 moulding sand in foundry industry. International Journal of Emerging Trends in Engineering Research, 8(9), 5454–5459. https://doi.org/10.30534/ijeter/2020/88892020

Lampman, S. (2009). Casting design and performance. ASM International, 165.

Mindhayani, I. (2019). PENYULUHAN KESELAMATAN DAN KESEHATAN KERJA (K3) DI UD. BAROKAH BANTUL. Jurnal Berdaya Mandiri, 1(1), 78–83.

Munadi, M., & Abdillah, H. (2020). Pengaruh Resolusi 3D CAD STL Pada Kualitas Geometri dan Dimensi (G&D) Produk Pola Cor 3D Printer. Infotekmesin, 11(2), 130–136. https://doi.org/10.35970/infotekmesin.v11i2.225

Downloads

Published

15-03-2021

Issue

Vol. 3 No. 1 (2021): Jurnal Berdaya Mandiri (JBM)

Section

Articles

Citation Check

License

Authors who publish with this journal agree to the following terms:

  1. The journal allow the authors to hold the copyright without restrictions and allow the authors to retain publishing rights without restrictions.
  2. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  3. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  4. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

 

Lisensi Creative Commons
The work is distributed under Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional.