Pemodelan Dan Analisa Produksi Kerupuk Subur Dengan Menggunakan Aljabar-Max-Plus

Authors

  • Dessy Agustin Savina Universitas Sanata Dharma, Indonesia
  • Rika Ardiansyah Saputra Universitas Sanata Dharma, Indonesia
  • Marcellinus Andy Rudhito Universitas Sanata Dharma, Indonesia

DOI:

https://doi.org/10.31316/j.derivat.v12i3.6667

Abstract

This study aims to model and analyze the optimal time from the time of the cracker production process from the beginning to completion using the Max-Plus algebraic approach at the cracker factory. The study was conducted by collecting data from the field, following the diagram of the production process, modeling mathematically using the Max-Plus algebra, and conducting a simulation calculation using the Scilab program. The results showed that the production process could be required in the Max-Plus algebra matrix equation. The results also showed that the production of cracker crackers can be done periodically, taking about 590 minutes per unit, or about 10 hours in total to complete one production unit. If it is adjusted to the factory work schedule that runs from 05.00 WIB to 15.00 WIB, then 1 production unit can be completed in 1 day, while 10 units require 4 days.

Keywords: : Linear System, Algebra Max-Plus, Production System

References

Rudhito, M. A. (2020). Aljabar max-plus dan penerapannya. Sanata Dharma University Press.

Subiono. 2015. Aljabar Min-Max Plus dan Terapannya. Surabaya.

Rohani, S., Amalia, R., Yulianto, T., & Faisol, F. (2018). Sistem Persamaan Linier Aljabar Max-Plus untuk Mengoptimalisasi Waktu Produksi Otok Goreng Khas Madura. Zeta-Math Journal, 4(1), 12-17. Diunduh di https://doi.org/10.31102/zeta.2018.4.1.12-17, pada 12 Maret 2024.

Nadya Novika, S., & Guswanto, B. H. MASALAH NILAI EIGEN ATAS ALJABAR MAX-PLUS PADA SISTEM PRODUKSI BULU MATA. Diunduh di https://core.ac.uk/download/pdf/588017201.pdf, pada 12 Maret 2024.

Binatari, N. (2013). Sifat-sifat Nilai Eigen dan Vektor Eigen Matriks atas Aljabar Maxplus. Jurnal Sains Dasar, 2(1). Diunduh di https://doi.org/10.21831/jsd.v2i1.2375, pada 1 Juni 2024.

Nawar, W., Rahakbauw, D. L., & Patty, D. (2023). Penjadwalan Waktu Proses Produksi Tahu Menggunakan Pendekatan Aljabar Max-Plus (Studi Kasus: Pabrik Sumber Rizki). Tensor: Pure and Applied Mathematics Journal, 4(2), 73-82. Diunduh di https://doi.org/10.30598/tensorvol4iss2pp73-82, pada 12 Maret 2024.

Nurmalitasari, D., & Iswahyuni, R. E. (2020, February). Desain Petri Net dan Aplikasi Aljabar Max-Plus Pada Produksi Susu Kedelai Berkah. In Prosiding SI MaNIs (Seminar Nasional Integrasi Matematika dan Nilai-Nilai Islami) (Vol. 3, No. 1, pp. 268-276). Diunduh di https://conferences.uin-malang.ac.id/index.php/SIMANIS/article/download/955/533 pada 12 Maret 2024

Ismail, S., Saputra, W., Baisan, P., Faturrohman, G., Kartika, B., Padliyah, S. M., ... & Abrar, K. (2022). Pemberdayaan Masyarakat Desa Krueng Tunong Aceh Jaya Melalui Usaha Kerupuk Udang Berbasis Komoditas Lokal. Meuseuraya-Jurnal Pengabdian Masyarakat, 120-127. Diunduh di https://doi.org/10.47498/meuseuraya.v1i2.1383 pada 12 Maret 2024.

Nugroho, T. S., & Sukmawati, U. (2020). Pengaruh metode pengeringan kerupuk udang windu (Paneaus monodon) terhadap daya kembang dan nilai organoleptik. Manfish Journal, 1(2), 107-114. Diunduh di https://doi.org/10.31573/manfish.v1i02.170 pada 12 Maret 2024.

Downloads

Published

25-12-2025

Issue

Vol. 12 No. 3 (2025): Jurnal Derivat (Desember 2025)

Section

Articles

Citation Check

License

Copyright (c) 2025 Dessy Agustin Savina, Rika Ardiansyah Saputra, Marcellinus Andy Rudhito

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).