Pengecekan Wiring Speaker System pada Kapal KCR 60M Kapak
DOI:
https://doi.org/10.31316/jk.v6i2.3603Abstract
Abstrak
Tujuan dari pembuatan makalah ini adalah untuk menganalisis kendala atau permasalahan pada Speaker System yang terpasang pada Kapal KCR 60M 5 Kapak. Metode yang digunakan adalah metode Penelitian Eksperimenl, yaitu dengan cara Check Line secara langsung pada wiring dan kabel yang digunakan pada sistem menggunakan alat Multimeter. Hasil menunjukan bahwa adanya kerusakan pada salah satu kabel yang terpasang pada sisem menyebabkan suara yang dikeluarkan tidak terlalu bagus atau terdapat noise. Penggantian kabel dilakukan dan dilakukan Check Line untuk yang terakhir agar memastikan permasalahan sudah selesai.
Kata Kunci: Speaker System, Multimeter, Kapal KCR 60M 5 Kapak
Â
Abstract
The purpose of making this paper is to analyze the constraints or problems in the Speaker System attached to the KCR 60M 5 Axe Ship. The method used is the Experimental Research method, which is by checking the line directly on the wiring and cables used in the system using a Multimeter tool. The results showed that there was damage to one of the cables attached to the system causing the sound emitted was not very good or there was noise. Cable replacement is carried out and a Check Line is carried out for the last one to ensure that the problem is resolved.
Keywords: Speaker System, Multimeter, Ship KCR 60M 5 Axe
References
DAFTAR PUSTAKA
AD Wiratmoko, AW Syauqi, MS Handika, DB Nurrizki, M Wafi, M Syai’in, I Sutrisno, MK Hasin, I Munadhif, AZ Arfianto, AWB Santosa, VYP Ardhana, (2019). Design of Potholes Detection as Road’s Feasibility Data Information Using Convolutional Neural Network (CNN), International Symposium on Electronics and Smart Devices (ISESD), Bali, Indonesia
D. S. Anggara dan C. Abdillah, “Modul Metode Penelitianâ€, 04 Maret 2019, [Online]. Available: http://eprints.unpam.ac.id/8584/2/METODE%20PENELITIAN.pdf. [Accessed 20 Juli 2022].
Danis Bagus Setiawan, Agus Khumaidi, Projek Priyonggo, Mohammad Basuki Rahmat, Imam Sutrisno, Khoirun Nasikhin, Adi Wisnu Sahputera, Ball Direction Prediction for Wheeled Soccer Robot Goalkeeper Using Trigonometry Technique, Applied Technology and Computing Science Journal, 2019
I Sutrisno, MA Jami’in, J Hu, MH Marhaban, N Mariun, (2014). Nonlinear Model-Predictive Control Based on Quasi-ARX Radial-Basis Function-Neural-Network, 8th Inter. Conference on Mathematical Modelling and Computer Simulation (AMS2014), Taipei
Imam Sutrisno, Mohammad Abu Jami’in, Jinglu Hu, An Improved Fuzzy Switching Adaptive Controller for Nonlinear Systems Based on Quasi-ARX Neural Network, International Seminar on Electrical Informatics and Its Education (SEIE 13),2013
Imam Sutrisno, Mohammad Abu Jami’in, Jinglu Hu, Implementation of Lyapunov Learning Algorithm for Fuzzy Switching Adaptive Controller Modeled Under Quasi-ARX Neural Network, 2nd International Conference on Measurement, Information and Control (ICMIC), 2018
Imam Sutrisno, Albiyan Wanda Syauqi, Muhammad Khoirul Hasin, Mohammad Basuki Rahmat, I Putu Sindhu Asmara, Daviq Wiratno, Edy Setiawan, Design of pothole detector using gray level co-occurrence matrix (GLCM) and neural network (NN), IOP Conference Series: Materials Science and Engineering, 2020
MA Jami’in, I Sutrisno, J Hu, (2015). The State-Dynamic-Error-Based Switching Control under Quasi-ARX Neural Network Model, in Proc. of the20 th International Symposium on Artificial Life and Robotics (AROB 20 th 2015), Japan
Downloads
Published
Issue
Section
License
Copyright (c) 2022 Imam Sutrisno, Muhammad Syahid Messiah, Faris Nofandi, Didik Dwi Suharso, Daviq Wiratno

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with this journal agree to the following terms:
-
The journal allow the authors to hold the copyright without restrictions and allow the authors to retain publishing rights without restrictions.
-
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
This work is licensed under a Lisensi Creative Commons Atribusi-BerbagiSerupa 4.0 Internasional.